18 August 2015 - Better late than never!

So I did a bit of a kak job of maintaining this blog, but at least we finished the project! And here she is:

Not too bloody shabby! I'm still getting used to riding her, but with every ride my confidence grows a little bit. So for now the plan is to just enjoy the hell out of her which isn't going to be hard on Cape Town's roads:

Thanks a lot for following my blog, and apologies for falling off the rails towards the end! If I'm feeling motivated I'll go back and fill in some of the blanks.

Cheers.

09 April 2015 - A Teaser (Cape Town Cafe Racer)

The shaping of the infamous tank is finally done, and it's primed and ready for spraying this weekend. After all that I must say it was worth it - it looks so much better having rounded out the underside.

I'm not going to post any more photos until she's done so here's a sneak preview of what's to come!

The popping should subside once we've balanced the carbs... 

Gives her a bit of personality though!

Some pictures of our almost complete Cape Town Cafe Racer:

  

Deciding on a tank pattern. Most NB that bottom line matches seat line

 

A view from the front. Replacing fork oil. 

Please drop as a line or a link to your own project if you feel at all motivated to do so. We'd love to hear your comments/suggestions. 

31 March 2015 - It's alive! (Cape Town Cafe Racer)

She starts!

Oscar's done a lot to the engine since I took this video - balancing things, adjusting valves, and other stuff I don't understand and wasn't involved in. He's been reading a lot of Snowbum's unbelievably detailed articles to brush up on some rusty areas. 

There's not that much left to do on her now. We're still busy shaping the tank, after which we need to spray. We bought a second hand compressor from Cash Converters for that. 

The alternator hasn't been charging the battery and Oscar's figured out that it's due to a faulty voltage regulator so we've ordered that from BMW and are awaiting delivery. 

Footpegs from speedmotoco.com have finally arrived!

Timeless

Fixing a leak in the drive shaft

Body filling this tank is the bane of my life

Bonus Selfie:

I got my transformer helmet and present you with a selfie model shoot below:

Not a typical Cafe Racer style helmet. Much more awesome. 

18 March 2015 - The Engine is in! (Cape Town Cafe Racer)

It's been almost a month since my last update!

The big news is that the engine is finally back in the bike where it belongs! In fact maybe even more exciting news is that the missing washer has been found! It was in the sump as we suspected - after we wrongly suspected (read "hoped") it was in the timing chain/sprocket chamber.

We've done quite a bit of work on the engine since we got it back from vapour blasting - we removed and cleaned the heads, replaced all the gaskets and o-rings, replaced the oil filter, replaced the head covers with peanut covers. Oil pressure sensor has been replaced. Sump removed and cleaned.

The missing washer and the engine being worked on

We also got our Ultrabatt last week! I can't believe how small it is compared to the original battery. Oscar's busy making a sexy bracket for it. 

Old vs. New

We've done a hell of a lot over the last few weeks, but I'm too tired to think/write about it so I'm just going to post some pics. If I'm feeling a bit more energetic later I'll add some more. 

Engine Before

Engine After (top cover missing)

Here's a photo of us with our helmets. I sent my gigantic one back - I'm going to get a Transformer helmet instead:

Human bobblehead

Please drop us a line if you have an questions, comments or suggestions for our Cape Town cafe racer conversion.

Cheers

Sean. 

22 February 2015 - The Return of the Engine (Cape Town Cafe Racer)

My best mate, Shea, fell off a balcony last Sunday and spent the week in ICU. It was touch and go for a while and scary as hell, so it's been a pretty shit week. He's been discharged now, though, and is under house arrest at his folks which is awesome. The bike has been a great distraction.

Oscar wasn't overreacting about the engine, it looks pretty epic:

Engine after vapour blasting. Note the newly serviced inside-out carbs.

The engine cover also arrived this week - it will be sprayed to match the engine. As you can see the old air filter box has been removed and replaced with cone filters. We opened up and cleaned the transmission which was a bit dirty and rusted. The little air filter coming out of the side of the cover is connected to a breather hole that went into the old air filter. Next step engine-wise is to take off and service the heads. We've also got some peanut covers to put on there. Oh yes - and the search for the missing washer continues! Unfortunately it wasn't sitting in the timing chain/sprocket chamber which means it's probably fallen into the sump which means we'll have to remove that as well.

Freddie popped by and helped Oz dismantle the transmission

Clutch looking a helluva lot better after cleaning

I spent 3 hours unsuccessfully trying to hand drill a hole into the disk-brake to counter sink the new Acewell speedo magnet into. That was a bit of a kak jol. In the end we took it to some engineers to get it done properly. 

I did have quite a lot of fun making the bracket for the speedo sensor though. We've got a bit of a holey theme going which I carried through to the bracket. It was frustrating spending so much time making something so small, but in the end it was worth it. 

 

It's attention to detail that's going to set this bike apart from the rest!
Speaking of which, the paint on that disk is going to need some touching up

The wiring is all done! Besides crimping a couple of wires I had nothing to do with this! The wiring diagram looks like something John Nash came up with and the harness looked like something out of Alien Vs Predator to me. I was disappointed to not have been more involved in the wiring but at least it was something to keep Oscar busy while I was away. Without it he might have been tempted to finish the bike without me!

The cockpit is looking very sleek/minimalist with most of the wiring having been jammed into the headlight and the switches replaced with micro switches which are almost done. 

We made some more holey plates to replace the reflectors on the front fork which were a bit of an eyesore. New Ultrabatt lithium batteries have been ordered. 

Oscar wants to take the bike to Killarney race track as soon as she's done to see who can record the fastest lap. I said that sounds like a terrible idea.

Sneaky look at the bike so far

Please drop us a line if you have any questions, comments, advice, or just to say howzit!

Cape Town Cafe Racer Conversion. 

11 February 2015 - Planet Zastron Round 2 (Cape Town Cafe Racer)

The fact that my last two updates have both been done from Zastron is probably not a coincidence. With work being so hectic I feel as though I've barely got time to work on the bike, never mind update this blog. It's hard to do much bike work from a distance of 1000 km, though, so I guess this is the next best.

Two weeks have passed since the last update and although it feels like we hit a serious go slow recently a lot has actually happened when I think about it. It's just been mostly stuff that doesn't translate into any serious visual progress to the untrained eye (my eye).

Last week while Oscar was busy chopping and welding the subframe and marvelling over his new auto-darkening welding mask I was tasked with plugging up the engine so that we could take it to Bernard to be vapour blasted. In the process I managed to drop a washer into the engine. Needless to say this was a huge fucking bummer. It means that we're now going to have to dismantle the engine a little bit more than we were hoping to but at least we'll get to take a look at the timing chain and sprocket while we're at it.

Prepping the engine for vapour blasting involved a lot of ad-libbing

Oscar has finished chopping and reinforcing the sub-frame and the seat is now mounted.

Oscar working on the sub-frame

Oscar's also busy working on some really sexy micro switches for indicators, horn, engine start/stop etc. 

The start of the micro switch

We've also started tweaking some of the minor details as we go. For example we weren't happy with the bar-end mirrors we bought, so we replaced them with classic chrome mirrors, which we then replaced with beautiful black bar-end mirrors Oscar found. Sounds a bit pedantic, but every detail counts!

The tank has been stripped and we've pretty much decided on colours (98% sure). We don't like the lines of the original tank so we're filling it and like I said in previous post we're also going to adjust the angle of the tank ever so slightly which makes a big difference to the overall aesthetic.

Filling the belly of the tank to improve the lines

I saw a couple of pretty cool BMW conversions at a shop called Platinum Motorcycles the other day. I must have walked passed the shop 100 times during my lunch break, but I never went in. Here are some pics of their bikes:

Just got a message from Oscar that the engine is ready to be collected. Message reads "Fucking, fucking, fucking hell.". Can't wait to see it!

Time to give the workshop a once-over

Please drop us a line if you have any questions, comments, advice, or just to say howzit!

Cape Town Cafe Racer Conversion.

28 January 2015 - Update from planet Zastron (Cape Town Cafe Racer)

We got the races out of the steering neck! Well, Oscar did. The welding trick didn't work quite as smoothly as we'd heard, but it loosened them up enough for us to knock them out.

We had a lekker full day to work on the bike on Saturday. We continued with the reassembly of the front end...

• Triple tree on
• Forks on
• Booties added
• Clip-ons attached
• Wing mirrors attached
• Mudguard modified and attached
• Wheel and caliper on
• Headlamp on

This is what it looked like:

Dad popped in for a drink.
At 6'4" he's a bit tall for this bike

It's fokken exciting to see it taking shape!

On Sunday we degreased the engine in preparation for the vapour blasting. Besides the frame it's all we're blasting, everything else (outer tube forks, caliper, brake drum) is being hand sanded and polished! Ain't nobody got time for anodising.

We also started stripping the tank. Turns out if you don't have the right (industrial) paint stripper this can be quite a bitch. Try not to get paint stripper on your skin, it's not lekker.

Got the two seat/tail moulds back on Monday (we liked the look of two so we wanted to see what they both looked like with the tank) and there was a clear winner. This tail, which is based on an old Aprilia tail (will get more facts on this later), was a much better fit with our tank than the conventional cafe racer round/bubble tail.

Getting the lines right is going to require a bit more work to the frame than we hoped, but it'll be well worth it in the end. Obviously the sub-frame will need to be chopped, but we'll also probably need to adjust the angle of the seat mount, and lift the back of the tank slightly. Oh, and we're probably going to be altering the shape of the tank slightly to get rid of that sharp angle (v) on the side.

I visited a great shop called Retro Prestige Motorcycles in Paarden Eiland during lunch on Monday. It's a workshop/parts shop/coffee shop owned by a friendly chap called David whose R100 Cafe Racer is proudly displayed at the entrance to the shop (rightly so). We've bought quite a few cool parts from these guys. I also saw this bike parked in my street that evening! First R65 conversion I've seen in real life. It's pretty, but it's not going to have anything on our beauty!

I'm in beautiful Zastron (Free State), visiting a client at the moment, and am having serious withdrawal symptoms. I can only hope Oscar's fighting the urge to run ahead without me...

Here's a pic of the vintage tyres we bought. This bike is going to be epic.

Wheels painted black and new vintage tyres mounted

Please drop us a line if you have any questions, comments, advice, or just to say howzit!

Cape Town Cafe Racer Conversion.